VOIP SIP / PSTN analogue ATA Adapter (1* FXS, 1* FXO & 1* RJ45 WAN)
Note:
It does not Support Skype.
- Make free calls and talk for free all over the world with this VOIP ATA VPA-11)
- Turn your Normal Phone or Cordless into Internet VOIP Phone.
- This device will allow your Normal or Cordless Phone to make / Receive Free calls through Internet or through Normal Phone Line.
- It does not need a computer it directly plug into your ADSL or DSL or any broadband router by RJ45 network cable.
- Simply plug any normal wired or cordless phone and your normal phone line if you prefer to use one phone set for both SIP line Account and your normal Phone line.
- It provides you extra telephone numbers which you can obtain for free from sipgate or for a small charge of £1.99 per from voiptalk.
- Further more you can buy unlimited calling package from voiptalk for £9.99 per month which allow you to make calls to UK and Worldwide day and night.
- It will allow you to receive calls on your normal line and will allow you to receive calls on your SIP line also.
- Answer your calls from anywhere you like simply take this ATA with you and plug it into internet enable RJ45 Port.
- It will allow you to make calls via using your land line just add # at the end of the number and the calls will be made via your normal land line.
- Support all ITSP using SIP "Internet Service Provider" such as Ringcentral BT, voipfone, SIPgate SIP Discount, IPTEL VOIPWISE, Asterisk, cheapvoip VoipTalk, Gradewell, freecall FWD, DrayTek, 3cx and many more. (Skype is not supported)
- Seamlessly integrates with IP PBX and Softswitch vendors VoIP solutions.
- NAT/PAT transparency for plug & play deployment Works behind NAT and PAT firewall.
- The Pluscom VOIP SIP IP ATA Adapter enables high-quality feature-rich telephone service through your Cable / DSL / ADSL Internet connection.
- Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones.
- Work with any SIP service provider, Any SIP PBX, gives you extra 2 Land lines and 2 SIP VOIP numbers, Let you make and receive free phones calls day and night via SIP.
- Support Caller ID (except incoming PSTN calls)
- Single voice port that supports legacy (analog) touch-tone telephones
- Connects legacy telephones to IP-based networks
- Advanced pre-processing to optimize full-duplex voice compression
- High performance line-echo cancellation eliminates noise and echo
- Dynamic network monitoring to reduce jitter artifacts such as packet loss
- Clear, natural-sounding voice quality VoIP Specifications
- Radvision Sip stack version 3.0.4.0
- Digest Authentication MD5
- Record-Route Headers
- Cable Color: Gray
- Adapter Color: Black
- Device Color: White
- Supports: FXO and FXS
- Voice Codec:
- G.729A
- G.726 (Option)
- G.711 A-Law
- G.711 U-Law
- Voice QoS:
- Diff Serv
- STUN (Simple Traversal UDP Through NAT): RFC3489
- Dual-tone Multi-frequency (DTME):
- DTMF tone detection and generation
- Mid-Call DTMF for IVR support
- RFC 2833 AVT tones
- Configurable for two sets of frequencies and single set of on/off cadence (US, UK)
- Line-echo cancellation:
- G.165, G.168 compliant
- Echo canceller for each port
- 8 to128 msec configurable echo length
- Nonlinear echo suppression
- Convergence time: 250 ms
- ERLE: 10 to 20 dB
- 1 PSTN port interface (FXO)
- 1 VOIP port interface (FXS)
- LAN Protocols/Interfaces:
- Ethernet interface
- Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards
- 10/100 Mbps auto selection
- Ethernet ports support Automatic MDI/MDI-X configuration transceiver
- 1x VOIP SIP ATA Adapter
- 1x UK Power Adapter
- 1x RJ45 Ethernet Network Cable
- 1x RJ11 Cable
- 1x CD with User Manual
- 1x Quick Installation Guide
- Also see the above image for Package contents.