Photo-electric Smoke Alarm Alert Sensor Detector
Installation:
1. (Independence or wireless type) Taking the battery into battery box before installation.
2. (Network type) Connect Dc 12V power, red wire for anode, black for cathode, white for COM, orange for No, yellow for NC.
3. Connect the power,the detector comes into operating state. Indicating LED flashes once per 40seconds, once per 1 second at alarm state.
4. Select proper place (normally mounted on the center of the ceiling) fix the mounting base,then put the detector into the base and turn it.
5. After installation, press the test button to test the output of the detector. LED should flash once per 1s. The detector should give out sound (independence type), should send out RF signal (wireless type), should drive relay (network type).
6. You can press the test button to test the detector or blow a little of smoke into the detector to testif it work properly. The detector will recover to normal working state when the smoke disperses.
- This product named Photo-electric detector (hereinafter called detector) detects the smoke by a couple of infrared Diodes.
- The detector adopts the special structure design has the dust proof, Moth proof and anti-outside light interference feature etc.
- The detector is suitable for detect the smoke in house, shops, hotels, restaurants, office buildings, schools, banks, library, computer house and storehouse etc.
- Test by hand
- Auto reset
- Asic adopted
- Anti-light, moth proof and dust proof
- Strong adaptability for circumstance
- SMT design, high stability
- Operating voltage 9v 6f22 battery
- Static Current: less than or equal to 20ua
- Alarm Current: less than or equal to 15ma
- Alarm Indication: red led flash
- Sound Level: 85db/m(independence or wireless type)
- Operating Temperature: -10 +50
- Operating Humidity: 95 %rh
- Detecting Area: 20square meter
- Alarm Output: sound& flash alarm (independence type)
- Rf Signal: 315mhz or433mhz (wireless type)
- Radio Distance: 100m(open area,wireless type)
- Size: diameter 106mm x 59mm
- 1 x Photo-electric Smoke Alarm Alert Sensor Detector